tempora F600 60.06L glueBox

glueBox - PUR edge banding without glue pot.

The glueBox attaches a thin PUR tape between the edge and the workpiece and fuses the two components together almost invisibly.  Through heat activation of the glue perfect adhesion is achieved.

• Fast: Ready to use in only 90 seconds
• Flexibility: Available in 3 coiled lengths of 25, 75 and 100 meters and in 3 heights of 16, 19 and 40 millimeters
• Comfort: Tool free PUR tape replacement
• Efficiency: Almost immediate switching to conventional glue pot for EVA glue and vise versa
• Saving: Our operational survey has found, when comparing only granulate costs, machine cleaning and maintenance, cost savings of almost 70% were achieved when using Gluebox over a standard glue pot edgebanding machine.

edgeControl: Edge and workpiece measurement with Bluetooth

Format-4 edgeControl makes operation and adjustment of the tempora edgebanders even easier and more precise.

The values ​​for edge and workpiece thickness that are recorded to the hundredth of a millimetre with the wireless measuring unit are transferred to the machine's smartouch operating unit via Bluetooth (workpiece thickness only with e-motion models). The controller recognises the measured values ​​and sorts them automatically according to workpiece or edge thickness. The operator then selects the desired setting values ​​from the measurement data log that contains the five last measured values. Smartouch automatically calibrates all required units to the exact dimensions.

With edgeControl, production losses due to typing or measuring errors as well as tolerance deviations of the edge dimensions are eliminated.

Air cushion table for easy and gentle material handling

Easy and careful handling of large-size and surface-sensitive workpieces Placed directly on the machine's infeed ruler and equipped with a 0.75 kW blower motor, a constant air cushion between the machine table and the resting workpiece ensures easy and gentle workpiece feed. The solid table construction with a 1050 x 400 mm supporting surface (with an additional air cushion table expandable to 2000 x 400 mm) and the flexible extendable frame guarantee maximum stability during workpiece feed.

Edge feed

Depending on the application, coiled and strip material from 0.4 up to 6 mm can be glued to panel materials up to 60 mm in thickness.

smartouch control unit with m-motion

The new smartouch control unit with 10.4' touch-screen and m-motion control enables a quick and easy selection and control of the aggregate as well as the complete monitoring of all machine functions.

smartouch control unit with x-motion PLUS

smartouch control unit and network connection reduces the manual settings to a minimum and enables a quick, easy and intuitive selection and control of the aggregate as well as the complete monitoring of all machine functions from the screen. The functions of smartouch include amongst other things:

• Unlimited memory for user-defined edge programs
• Maintenance plan, odometer for total metres of material used
• Simple, self-explanatory representation of the units and their functions
• Aggregate selection, exact fine adjustment of the motor positionable aggregates (accuracy of up to 1/100 mm) all from the main control panel
• Glue temperature setting and automatic temperature reduction of the glue whilst in standby mode Now available with a monitor size of 10.4' and 15'

Premilling unit
Ensures a perfect “finish”

Two counter rotating, activation controlled and individually adjustable premilling units with diamond coated spiral cutters ensure first class edge processing before the material is glued to the edge. With the premilling unit you will achieve tear free edges when processing laminated material. After entering the exact dimensions, the premilling unit executes a perfect edge cut on your panels. The depth of cut can be electronically positioned on all of the e-motion models as standard.

Format-4 advantEdge for an optical zero-joint

The patented advantEdge aggregate from Format-4 enables the optical zero joint when processing co-extruded edge and laser edge material. The aggregate is controlled by the workpiece and can be activated and deactivated directly from the control unit. advantEdge offers the homogenised optic finish of the workpiece with the panel and edge material, in particular with high gloss material. An edge material suited exactly to the material ensures a zero-joint line and as no time-consuming glue change of various colours is required, you profit from considerably reduced changeover times.

Pressure zone – Practically invisible glue-joint

Solid in its design, the first operation controlled motor driven roller presses the edge material on to the workpiece. The application control ensures that there can be no smearing of glue or movement of the edge material whilst processing. The two conical pressure rollers close the glue joint above and below. 

End trimming unit
Precise cuts for every application

The end trimming unit consists of two inde­pendent saw units with high-frequency motors (12,000 rpm). Linear guides ensure maximum precision. The end trimming unit tilts from 0° to 10°. Depending on the machine specification, tilting is regulated manually or pneumatically via the control panel (e.g. 10° bevel cut, front only, rear only or front and rear).

Multi-functional trimming unit
Innovative precision with quick setup

The multi-functional flush, radius and thin-edge bevel trimming unit consists of two independent trimming units with high frequency motors (12,000 rpm). Linear guides guarantee the highest possible precision with little maintenance required. The easy adjustment and setup of the unit means that it is extremely quick to change between different edge thicknesses and profiles. Depending on the equipment option chosen, the multifunctional trimming unit can either be adjusted manually or using electro-motors, controlled via the control panel.

Corner rounding unit
An indispensable option

No more time consuming postprocessing of the workpiece! The Format-4 corner rounding unit provides the perfect 'finish' of workpiece corners (for both softforming and postforming materials) for edge materials from 0.4 mm to 3.0 mm and a processing height of 60 mm and a feed speed from 10 m/min. The solid cast iron construction, linear guides and a high-quality spindle with a starting clutch ensure long-term precision. The corner rounding unit is controlled from the control panel, naturally with the option of choosing which corners need to be rounded (only on the front of the workpiece, only on the back, or both on the front and on the back).

Two motor double corner rounding unit

Especially for post and softforming the tempora 60.06L with double motor corner rounding unit enables a new dimension in edgebanding. Workpieces with different profiles can be completed in just a single processing step, the need for time consuming subsequent processing is rendered redundant by the perfect finish.

Radius scraping unit

The radius surface receives a light scraping, removing any remnants from the trimming process and ensuring a smooth “finish”. The fine adjustment is manual. The radius scraper unit can be disengaged either manually or using electro-motors from the control panel, depending on the model. On all of the e-motion models, the fine adjustment is carried out on the colour touch screen.

Buffing unit

The unit is made up of two independent electric motors, which are equipped with cotton brushes. The task of the buffing unit is to clean and polish the top and bottom part of the edge. The buffing unit gives a super finish for ABS and PVC edging material. The machine can, on request, be equipped with spraying equipment to apply polish onto the workpiece.

Electronically controlled glue scraping unit

For a perfect surface finish. The light scraping function of the surface scraper knives removes all glue residues from the glue bond on the work­piece surface. One more step towards the perfect and completely finished workpiece.

Spraying equipment for the perfect “finish”, leaving a workpiece requiring no further processing

Low consumption guaranteed due to application controlled spray nozzles to apply separation solution for PUR glue, antistatic solution and lubricant for sensitive edging materials and cleaning agents and polish for clean workpieces and a perfect “finish”.

Infrared lamp
for an improved edge adhesion when processing cold workpieces

The operation controlled, high quality quartz infrared lamp warms the edge surface in front of the glue unit. This guarantees that the edging adheres to cold workpieces.

“Nesting” Package

The “Nesting” Package optimises the processing of workpieces with hinge borings or surfaces with acute angles.

Pressure beam

On both of the models (”m-motion“ and ”x-motion PLUS“), the pressure beam is positioned using a handle. The position of the pressure beam can be read precisely using the digital counter. 

Infeed fence

Variable setting of the depth of cut of the premilling unit. With both equipment options, the settings are carried out manually using an indicator clock. The variable depth of cut can be adjusted and set between 0–2 mm. 

puReady: nitrogen box for glue pots with PUR adhesive

The puReady nitrogen box makes you flexible in the use of PUR adhesives. In the future you can stay relaxed during production breaks, colour or glue changes. With puReady, your PUR adhesive, stored in nitrogen, remains fresh and processable for a long time. This keeps you flexible in edgebanding and also facilitates the cleaning of the glue pots.

• Delays reaction processes in the PUR adhesive and thus prolongs the processing time
• Facilitates and speeds up the cleaning process
• Increases flexibility when using different PUR colours and PUR adhesives
• Provides space for the storage of two glue pots
• Simple operation and clear control displays
• Mobile and space saving without power- and compressed air connection
• Compatible with all glue pots of the tempora edge banders F600 / F800

Save twice the space.

The Format-4 storEdge offers space saving storage of your edge material, replaces the edgebander support plate and can be placed next to the machine as and when required.

Format-4 storEdge

The practical edge storage system 'storEdge' can be additionally equipped with a support plate.

Format-4 storEdge including support

Your most important edge material, always at hand and stored with ease. With the optional support plate your edgebander can always be loaded with edge band material.